Hot Tub Movers

Nationwide · England, Scotland & Wales

Hot Tub Movers across the UK

Hot tubs moved, craned and reconnected without damage to garden or spa.

In short

Hot Tub Movers is a UK hot tub relocation service that drains, disconnects, tips and transports hot tubs and swim spas, then positions them on a new base. Crews use spa dollies, sledges and, where access is blocked, HIAB or mobile crane lifts. We cover moves within a garden, to a new house and collection of second-hand tubs.

  • Free, no-obligation quotes
  • Vetted, insured specialists
  • Clear fixed prices

Free Hot Tub Movers quote

No obligation. We only use your details to reply about this job.

Fixed, clear prices

One all-in price before any work starts.

Vetted specialists

Insured teams who do this work every week.

Responsible disposal

Licensed waste routes and proper paperwork.

500 areas covered

Pages for every town we serve.

An empty hot tub weighs between 250kg and 500kg, is often wider than a garden gate, and has a shell, cabinet and plumbing that crack if it is dropped or dragged. Moving one is a job for a trained crew with a spa dolly, a sledge and a vehicle with a tail lift or crane. Most damage happens in the last few metres, scraping round a corner or over a step, which is why planning the route matters as much as the lift itself.

Hot Tub Movers arranges vetted, insured crews across the UK for every kind of hot tub move: shifting a tub to another spot in the garden, taking it to a new house, collecting a second-hand spa you have bought, or lifting a tub over a house with a crane. We drain and disconnect the tub, protect the shell and cabinet, move it on its side and set it level on a suitable base at the other end, ready for your electrician to reconnect.

How it works

  1. Send details and photos

    Tell us the make, size and approximate weight of the tub, both addresses and the route out of the garden. Photos of the tub, gates, paths and any steps help us decide whether a crane is needed.

  2. Access check and quote

    We confirm whether the tub can be wheeled out on its side, needs panels or fences removing, or must be lifted with a HIAB or crane. You receive a clear quote covering the method and crew.

  3. Prepare the tub

    Drain the tub at least 24 hours before the move and have an electrician isolate and disconnect the supply. Make sure the new base is level, finished and cured.

  4. Move day

    The crew removes steps and cover, tips the tub onto a dolly or rigs it for a crane lift, transports it secured on its side and positions it on the new base.

  5. Level and hand over

    The tub is checked for level and full support. Your electrician reconnects the supply, then you refill, balance the water and check for leaks before heating up.

Hot Tub Movers prices

Hot tub moves are priced on the size and weight of the tub, the access at both ends and the distance. A standard tub with wide side access is quick and simple. Crane lifts, swim spas, long carries and steps add equipment and crew, which increases the price.

JobGuide priceNotes
Repositioning within the same garden£200–£400Drained tub moved on a dolly or skates to a nearby prepared base.
Local hot tub relocation£350–£650Crew, spa dolly and tail-lift vehicle with good access at both ends.
Long-distance hot tub move£650–£1,200Priced mainly on mileage; access difficulties at either end cost more.
HIAB crane lift£450–£900 per liftLorry-mounted crane over a house or wall, depending on reach and weight.
Swim spa relocationfrom £2,000Mobile crane at both ends and flatbed transport; quoted after a survey.
Hot tub removal and disposal£250–£500Includes cutting up if needed and disposal through licensed facilities.

What affects the price →

Who we work for

Homeowners moving house

People who want to take their hot tub with them, and need it drained, moved and set on a new base without damage to the tub or either garden.

Second-hand buyers

Buyers who have found a used hot tub online and need it collected from the seller and delivered home, often with tricky access at one end.

Holiday let owners

Owners of lodges, cottages and glamping sites who replace, reposition or add hot tubs between seasons and need the work done between bookings.

Hot tub retailers

Dealers who need trade-ins collected, display models moved between showrooms, or deliveries made where their own team lacks crane access.

Landscapers and builders

Garden contractors who need a tub moved out of the way while they lay patios or decking, then returned to the new base afterwards.

Rules and standards that apply

  • Installing a new electrical circuit for a hot tub is notifiable work under Part P of the Building Regulations in England and Wales, so it should be done by a registered competent person electrician or signed off through building control.
  • Electrical installations for hot tubs should be designed to BS 7671, the IET Wiring Regulations, which include specific requirements for RCD protection and equipment located outdoors.
  • Crane lifts are covered by the Lifting Operations and Lifting Equipment Regulations 1998, which require each lift to be planned by a competent person and carried out with suitable, examined equipment.
  • Anyone who takes away an old hot tub as waste for payment must be a registered waste carrier, and pumps and control packs fall under the WEEE Regulations for electrical waste.

How to choose the right hot tub movers company

  • Ask how they move the tub, as it should travel on its side on a spa dolly or sledge, not be dragged.
  • Check their insurance covers the tub in transit and any damage to gardens, fences or property.
  • For crane lifts, confirm there will be a lift plan, a qualified operator and a slinger signaller on site.
  • Make sure they will check the new base is level and strong enough before setting the tub down.
  • Confirm who is arranging the electrical disconnection and reconnection, as this should be done by a qualified electrician.
  • Ask whether removing fence panels, gates or decking is included in the price.

Frequently asked questions

How much does it cost to move a hot tub?

Moving a hot tub locally usually costs £350 to £650 with good access, and repositioning within the same garden costs £200 to £400. If a HIAB crane is needed, expect to add £450 to £900 per lift. Swim spas start from around £2,000 because they need mobile cranes and a flatbed lorry.

How heavy is a hot tub when empty?

Most empty hot tubs weigh between 250kg and 500kg, depending on size and build. A small two to three-person tub may be under 250kg, while large seven or eight-person tubs can be closer to 500kg. Swim spas often weigh 1,000kg to 2,000kg empty. Filled with water and bathers, weights rise to several tonnes.

Can a hot tub go through a side gate?

A hot tub can go through a side gate if the gap is wider than the tub's depth when tipped on its side, which is usually 90cm to 100cm. Allow extra room for the dolly and handlers. Measure tight corners, steps and overhanging obstacles too. If the route is too narrow, a crane lift is usually the answer.

Do I need an electrician to move a hot tub?

Yes, a qualified electrician should isolate and disconnect the hot tub before it is moved, and reconnect it at the new location. Hot tubs usually run on a dedicated circuit with RCD protection. If a new circuit is needed at your new home, this is notifiable work under Part P in England and Wales.

How long before moving should I drain my hot tub?

Drain the hot tub at least 24 hours before the move. Even after the shell looks empty, water stays in the pipework, pumps and foam insulation, adding weight and potentially leaking during transport. Leave the cover off and drain plugs open where the manufacturer allows, so it can dry out as much as possible.

When do you need a crane to move a hot tub?

You need a crane when there is no ground-level route wide enough for the tub, such as a terraced house with no side access or a garden reached only through the house. A HIAB lorry crane can lift most standard tubs over a house if it can park close enough. Swim spas almost always need a crane.

What base does a hot tub need?

A hot tub needs a flat, level base that can support the full filled weight. A reinforced concrete slab at least 100mm thick is the most common choice, and purpose-made spa bases or compacted hardcore with paving can work for smaller tubs. Decking must be designed specifically for the load, often with extra joists and posts.

Can a hot tub be moved on its side?

Yes, hot tubs are normally moved on their side, which is how they are delivered from the factory. This makes them narrow enough for gates and vans. The tub should rest on its frame with padding, never on the cabinet panels alone, and be strapped securely for transport. Check the manufacturer's guidance if you are unsure.

See all FAQs →

Get a free hot tub movers quote

Tell us what you need and we'll come back with a clear price.

Request a quote